The Plazadek System is a reliable waterproofing solution for floating deck applications for use with pavers, duckboards or other wear surfaces. This system is ideal for residential applications where roof height or weight is a consideration.
The Plazadek System employs the superior waterproofing performance of the Duradek Ultra membrane which is professionally integrated into the building envelope to assist in managing water away from the structure, thus protecting the building and extending its life.
Since 1974 over 150 million square feet of Duradek outdoor vinyl flooring has been successfully waterproofing sundecks, balconies, roof decks and more.
PLAZADEK SYSTEM WITH DURADEK™ ULTRA PVC MEMBRANE
Plazadek Product Features
- 60 mil thickness.
- 10 year waterproofing warranty.
- Useable immediately after installation (no curing time).
- ICC listed as a Thermoplastic Roofing Membrane (AC 75) and a Pedestrian Traffic Coating (AC 39) .
- Class A & C Fire Rated Assemblies.
- Expands and contracts with substrate without cracking (tested to -40 + 1oC).
- Installed only by authorized and trained contractors using sound roofing details.
PHYSICAL PROPERTIES
- Calendared polyvinyl chloride (PVC) film laminated to a woven, heat-set polyester fabric.
- Surface is factory printed and top-coated with a PVC/acrylic finish.
- Weight: 55 oz. per sq. yd. (1864 g/m2).
- Thickness: nominally 0.060 inch [60 mils (1.5 mm)] .
- Width: 72 inch (182.88 cm).
- Length: master rolls 25 yards (22.86 m) /or cut to order.
TESTS & EVALUATIONS
| Code Compliance | ICC-ES No. 2151 | Thermal and Moisture Protection Evaluation Report Compliance with 2012 and 2015 IBC & IRC - Section 07 18 13 Pedestrian Traffic Coatings - Section 07 54 00 Thermoplastic Roofing Membrane - Section 07 54 19 Polyvinyl Chloride Roofing |
| FBC Report No. FL20069.2 | Compliance with 2017 Florida Building Code | |
| TDI Report No. RC-477 | Meets Texas Department of Insurance Requirements | |
| CGSB QAI Report No. RJ0449P-1R1 | Compliance with CAN/CGSB 37.54-95 - Polyvinyl Chloride Roofing & Waterproofing Membrane Type 3, Class B | |
| CCMC Report No. 13134-R | Compliance with 2010 NBC - Traffic Coating and Walkable Roofing Membrane over Habitable or Rated Space | |
| Independent Quality Control | QAI Listing No. B1023-2 | Quality Auditing Institute - an accredited third party product certification body to ensure consistent product quality |
| Fire Classification | QAI Engineering Evaluation RJ0720F-1 & RJ5052F-1 | ASTM E108-08 Fire test of roof covering methods. - Class A and Class C fire rated assemblies |
| QAI Engineering Evaluation T731-2 & T731-8 | CAN/ULC S107-3 Methods of fire tests of roof coverings. - Class A and Class C fire rated assemblies | |
| Wind Uplift | QAI Test Report No. RJ0913P-1R2 | Passed ANSI/FM 4474 (2004) - to evaluate the wind uplift resistance of roof assemblies |
| Edge Flashing Pulloff Resistance | Farabaugh Test Report No. T128-11 | Passed ANSI/SPRI ES-1 wind design standard - for edge systems used with low slope roof systems |